Pulp Heavy Slag Extruder

Pulp thickening requires equipment such as heavy slag s […]

inclined screw thickner

ZNS type pulp thickening machine is mainly applied for washing and thickening all kinds of pulp.

Application & Features of Inclined Screw Thickener

1. Special brush which is synchronized running with screw can prevent filter pore from blocking, good dehydration effect.

2. Dehydration by gravity, low power consumption.

disc thickner

ZNP Series Disc Thickener is used to wash and thicken for low consistency slurry.

Application & Features of Paper Pulp Disc Thickener

Disc Thickener is maninly used for low consistency stock thickening. The water log installation height is not needed. The paper pulp washer and thickener machine can replace traditional gravity cylinder thickener. In the same floor space, the throughout of the gravity disc thickener is serval times more than that of the gravity cylinder thickener, so a lot of space and power can be saved.

Performance and Working Principle of Dic Thickener

The pulp at consistency of 0.8-1.2% enters the vat and attached the disc sector, filtrate is guided by hollow shaft and discharged out at two end. Stock attached on sector is knocked off by high-pressure shower. The thickened stock at consistency of 3-4% flow over the plate of adjusting valve and into discharge chamber where it is out feed. The rotation speed of main shaft can be adjusted for required outlet consistency and capacity.

high speed stock washer

Application& Features of High Speed Stock Washer

1. The pulp washer machine is mainly used for washing and concentrating in various domestic and overseas waste recycled pulp, chemical pulp before or after bleaching. Removing ink particles, fibers and other small impurities from the slurry with high efficient.

2. High efficiency of impurity prolapse, high efficiency dewatering, very clean after wash the slurry.

3. Less occupied area, large production capacity, low power consumption.

flotation deinking machine

Application & Features Flotation Deinking Machine

ZFM Flotation Deinking Machine is mainly applied to deink recycled pulp. The flotation deinking pulp cell can effectively remove the ink, light impurities and stickies, etc.

1. High effcient flotation, high consistency scum, less fiber loss.

2. Easy maintenance, low power consumption, low operation cost.

3. Only one set can achieve 4-5 stages of flotation, has advantages of less occupied area.

sludge dewatering machine

HD Sludge Dewatering Machine is applied to concentrate sludge in paper making industry.

Advantages of Sludge Dewatering Machine

a) Automatic operation

b) High aglomerate rate

c) Low polymer consumption

d) Easy operation and maintenance

e) High dewatering rate

f) Low power consumption

g) Low noise level

h) High Dryness and solid capture rate

i) Anti-abrasion and anti-corrosion protection,

j) Roller coated with thermoplastic polyamide (Degussa or Rilsan PA Powder)

k) Easy to dispose discharged solid cake.

l) Variable application

disc disperser

Application & Features of Disc Disperser

1. This type disc disperser is mainly used to disperse the stickies, grease, wax, plastic, rubber and ink particles and other hot melt impurities from paper pulp.

2. Reasonable disc tooth structure ensure an effective dispersion to gooey, ink particles, etc.

3. Automatic lubrication system ensures a stable running of equipment.

4. Matching with different fluted disc according to the different type of stock.

Gravity Type Cylinder Thickener For Paper Industry

This series of products have the advantages of cylinder […]

Application & Features of Paper Pulp Screw Press Washer

1. The screw press washing equipment is mainly suitable for washing and thickening all kinds of paper pulp.

2. For screw shaft, the compression ration is axially distributed reasonally, thickening effect is good.

3. In discharge side, fitted with inner dewatering assembly with holes, which can efficiently secure uniformly of dewatering of inside and outside pulp layer.

4. Pneumatic back-push assembly can guarantee the stability and adjustment of discharge consistency.

5. Special screw structure in outlet, easy to maintain.

Application & Features of Mid Consistency Mixer

1. This medium mixer is used in mid consistency bleaching section of stock preparation process, which fully mixes chemicals, steam and pulp.

2. Adopt tripe-blade rotor which helps in working efficiency. High speed rotation of rotor makes stock fluidization and destroys fiber structure, so that reaches the best mixing result.

3. Inner structure with spiral bar, avoilding stock detained in shell, reducing pressure losses.

4. The rotation direction of rotor is perpendicular to the flow direction of stock, preventing bleaching agents from education and overflowing and saves chemicals.

5. Directly connect after medium consistency pump, obviously energy saving.

Application & Features Bleaching Tower

1. High consistency paper pulp bleaching tower in paper mill is mainly used for high concentration of hydrogen peroxide bleaching of deinking pulp, groundwood pulp or other kinds of pulp.

2. Cone structure of tower reduce the possibility of stock bridging.

3. Special inner structure ensures pulp fall uniformly, which unifies pulp falling time and bleaching time.

4. At the bottom dilution function achieve high consistency bleaching, low consistency conveying. The pulp bleaching equipment makes the process of stock preparation simpler.

ZPT Series M.C. Bleaching Tower is mainly used for high concentration of hydrogen peroxide bleaching of deinking pulp, groundwood pulp or other kinds of pulp.

Application & Features of M.C. Bleaching Tower

1. Cone structure of tower reduce the possibility of stock bridging.

2. Special inner structure ensures pulp fall uniformly, which unifies pulp falling time and bleaching time.

3. At the bottom dilution function achieve high consistency bleaching, low consistency conveying. It makes the process of stock preparation simpler.